MT-Driver - GOWIZ. Medical Products Corporation Ltd.

*For visual impression only.

*For visual impression only.

Catalog Number: MTD20902

Catalog Number: MTD20902

The MTDRIVER is designed to assist the dental Professional
to easily and effortlessly close and open prosthetic screws with a 1.27mm hex. head

Instructions For Use:

Charge the driver (C-Type Charger)
(about 50 minutes)

Insert the 90º head, by turning it onto the driver.

Insert the 1.27mm bit into the head of the screw driver.

Open and close buttons, allowing easy and simple operation of the driver.

5.For cleaning, disconnect the 90º head, clean and place in the autoclave.

Electric Torque:

low torque: 0.08-0.12Nm

Do not autoclave the motor.

*Please note that the driver can reach up to 30Ncm when fully charged.

200RPM

Catalog Number: MTD23901

Catalog Number: MTD23901

The MTDRIVER Extended:

Is designed to assist the dental Professional
to easily and effortlessly close and open prosthetic screws with a 1.27mm hex. Head

The driver comes at two Ncm- 20 & 30

Instructions For Use:

Charge the driver (C-Type Charger)
(about 50 minutes)

Insert the 90º head, by turning it onto the driver.

Insert the 1.27mm bit into the head of the screw driver.

Lock the bit into the drivers head with the special lock mechanism.

Open & Close buttons, allowing easy & simple operation of the driver.

5.For cleaning, disconnect the 90º head, clean and place in the autoclave.

Do not autoclave the motor.

Electric Torque:

low torque: 0.08-0.12Nm

high torque:0.3-0.45Nm

Torque Adjustment:

When the light is off, press the light control button, is the light flashes once, it will be low torque; if the light flashes 2 times, it is high torque.

*Please note that the driver can reach up to 25Ncm or 35Ncm when fully charged.

RPM: 200RPM

ORDER NOW

ORDER NOW